Peugeot 2008: Driving / Drive Assist Plus
Only available on versions with the EAT8 automatic gearbox and gear selector.
This system automatically adjusts the speed and corrects the trajectory,
using the Adaptive Cruise Control with Stop & Go function in conjunction with
the Lane Positioning Assist.
These two functions must be activated and in operation.
This system is especially suitable for driving on motorways and main roads.
For more information on Adaptive Cruise Control and Lane
Positioning Assist, refer to the corresponding sections.
The
system assists the driver by acting on the steering, acceleration and braking,
within the limits of the laws of physics and the capabilities of the vehicle.
Certain road infrastructure elements or vehicles present on the road may not be
properly seen or may be poorly interpreted by the camera and radar, resulting in
an unexpected change in direction, a lack of steering correction and/or
inappropriate management of acceleration or braking.
Refer to the General recommendations on the use of driving and manoeuvring
aids and to Cruise control - particular recommendations.
This system automatically keeps
the vehicle’s speed at the cruise value programmed by the driver (speed
setting), without using the accelerator pedal...
Refer to the General recommendations on the use of driving and manoeuvring
aids and to Cruise control - particular recommendations.
This system automatically maintains the speed of your vehicle at a
value which you set (speed setting), while keeping a safe distance from the
vehicle in front (target vehicle), and which has been set beforehand by the
driver...
Other information:
With the engine running, a press
mutes the sound.
With the ignition off, a press turns the system on.
Increase or decrease the volume using the wheel or the "plus" or "minus"
buttons (depending on the equipment).
Use the buttons on either side of or below the touch screen to access the
menus, then press the virtual buttons on the touch screen...
Manually adjusting the halogen or LED technology headlamps
To avoid dazzling other road users, the height of these headlamp beams should
be adjusted according to the load in the vehicle.
0 (Initial setting)
Driver only or driver + front passenger
1 5 people
2 5 people + load in the boot
3 Driver only + load in the boot
4 5 6 Not used
This information is provided as a guide only...