Peugeot 2008: Ease of use and comfort / Manual air conditioning
Press the Climate button
to display the system controls page.
![Peugeot 2008. Manual air conditioning](images/manual_air_conditioning-2012/1959/peugeot_2008__manual_air_conditioning_311.jpg)
- Temperature adjustment
- Air flow adjustment
- Air distribution adjustment
- Air conditioning on/off
Adjusting the temperature
- Press one of the buttons 1 (- or +) to set the temperature.
Air flow adjustment
- Press one of the buttons 2 (- or +) or turn the knob 2
to decrease or increase the speed of the fan.
When the air flow is reduced to a minimum, ventilation stops.
Air distribution adjustment
- Press button 3 to adjust the air flow distribution inside the
passenger compartment.
Central and side air vents,
footwells
Central and side air vents
Windscreen
Windscreen, footwells
Footwells
Air conditioning on / off
The air conditioning system is designed to operate effectively in all seasons,
with the windows closed.
It is used to:
- lower the temperature in summer,
- increase the effectiveness of the demisting in winter, above 3°C.
- Press button 4 to activate/deactivate the air conditioning
system.
Air conditioning does not
operate when the air flow is disabled.
To obtain cool air more quickly, enable interior air recirculation for
a brief period. Then return to the intake of exterior air.
Switching off the air conditioning may result in some discomfort
(humidity or misting).
Air intake
The air circulating in the passenger compartment is filtered and originates
either from the exterior, via the grille located at the base of the windscreen,
or from the inside in air recirculation mode...
This system automatically controls the activation of the air conditioning
system, regulating the temperature, air flow and air distribution inside the
passenger compartment...
Other information:
Automatic 8 speed gearbox with a push selector. It also offers a manual mode
with gear changes via control paddles situated behind the steering wheel.
Gearbox selector positions
P. Park
For parking the vehicle: the front wheels are blocked.
R. Reverse gear
N...
With Diesel engines, the fuel system must be primed if you run out of fuel.
Before starting to prime the system, it is essential to put at least 5
litres of Diesel into the fuel tank.
For
more information on Refuelling and on Misfuel prevention (Diesel),
refer to the corresponding section...
Categories
Load distribution
Distribute the load in the trailer so that the heaviest items are as
close as possible to the axle, and the nose weight approaches the maximum
permitted without exceeding it.
Air density decreases with altitude, thus reducing engine performance. The
maximum towable load must be reduced by 10% per 1,000 metres of altitude.
Use
genuine towing devices and their wiring harnesses approved by PEUGEOT. We
recommend having them fitted by a PEUGEOT dealer or a qualified workshop.
read more