DS 3 Manuals

Peugeot 2008: Warning and indicator lamps / Warning Light

Displayed as symbols, the warning and indicator lamps inform the driver of the occurrence of a malfunction (warning lamps) or of the operating status of a system (operation or deactivation indicator lamps). Certain lamps light up in two ways (fixed or flashing) and/or in several colours.

Associated warnings

The illumination of a lamp may be accompanied by an audible signal and/or a message displayed in a screen.

Relating the type of alert to the operating status of the vehicle allows you to determine whether the situation is normal or whether a fault has occurred: refer to the description of each lamp for further information.

When the ignition is switched on

Certain red or orange warning lamps come on for a few seconds when the ignition is switched on. These warning lamps should go off as soon as the engine is started.

For more information on a system or a function, refer to the corresponding section.

Warning lamp continuously lit

The illumination of a red or orange warning lamp indicates the occurrence of a fault that needs further investigation.

If a warning lamp remains lit

The references (1), (2) and (3) in the warning and indicator lamp description indicate whether you should contact a qualified professional in addition to the immediate recommended actions.

  1. You must stop the vehicle.

    Stop as soon as it is safe to do so and switch off the ignition.

  2. Contact a PEUGEOT dealer or a qualified workshop.
  3. Visit a PEUGEOT dealer or a qualified workshop.

    Warning and indicator lamps

    ..

    List of warning and indicator lamps

    ..

    Other information:

    Peugeot 2008 2019-2026 Owner's Manual: Automatic headlamp dipping


    When the ring is in the "AUTO” position, this system automatically switches between dipped and main beam headlamps according to the lighting and traffic conditions, using a camera located at the top of the windscreen. This system is a driving aid. The driver remains responsible for the vehicle's lighting, its correct use for the prevailing conditions of light, visibility and traffic, and f..

    Peugeot 2008 2019-2026 Owner's Manual: Stop & Start


    The Stop & Start function puts the engine temporarily into standby - STOP mode - during phases when the vehicle is stopped (red lights, queues, etc.). The engine restarts automatically - START mode - as soon as the driver wishes to move off again. Primarily designed for urban use, the function is intended to reduce fuel consumption and exhaust emissions as well as the noise level when stat..

    Categories

    read more

    Copyright © 2026 www.pe2008.net