DS 3 Manuals

Peugeot 2008: Indicators / Engine oil level indicator

(Depending on version.)

On versions fitted with an electric gauge, the engine oil level status is displayed on the instrument panel for a few seconds when the ignition is switched  on, after the servicing information.

Peugeot 2008. Engine oil level indicator The level read will only be correct if the vehicle is on level ground and the engine has been off for more than 30 minutes.

Oil level incorrect

This is indicated, depending Oil level incorrecton the instrument panel, by the display of "OIL" or by the message "", accompanied by the lighting of the Service warning lamp and an audible signal.

If the low oil level is confirmed by a check using the dipstick, the level must be topped up to avoid damage to the engine.

For more information on Checking levels, refer to the corresponding section.

Gauge fault

This is indicated, depending on the instrument panel, by the display of "OIL_ _" or by the message "Oil level measurement invalid", warning lamp and an audible signal.

Contact a PEUGEOT dealer or a qualified workshop

Peugeot 2008. Engine oil level indicator In the event of a fault with the electric gauge, the oil level is no longer monitored.

 If the system is faulty, you must check the engine oil level using the manual dipstick located under the bonnet.

For more information on Checking levels, refer to the corresponding section.

    Service indicator

    The servicing information is expressed in terms of distance (kilometres or miles) and time (months or days). The alert is given at whichever of these two terms is reached first...

    Engine coolant temperature indicator

    With the engine running: In zone A, the temperature is correct. In zone B, the temperature is too high; the associated warning lamp and the central STOP warning lamp come on in red on the instrument panel, accompanied by the display of a message and an audible signal...

    Other information:

    Peugeot 2008 2019-2026 Owner's Manual: Drive Assist Plus


    Only available on versions with the EAT8 automatic gearbox and gear selector. This system automatically adjusts the speed and corrects the trajectory, using the Adaptive Cruise Control with Stop  &   Go function in conjunction with the Lane Positioning Assist...

    Peugeot 2008 2019-2026 Owner's Manual: Cruise control


    Refer to the General recommendations on the use of driving and manoeuvring aids and to Cruise control - particular recommendations. This system automatically keeps the vehicle’s speed at the cruise value programmed by the driver (speed setting), without using the accelerator pedal...

    Categories

    read more

    Copyright © 2026 www.pe2008.net