Peugeot 2008: Unlocking the vehicle / Proximity Keyless Entry and Start
This Keyless Entry and Starting system enables automatic vehicle locking/unlocking
simply by detection of the electronic key.
As long as the driver has the electronic key on their person, the vehicle
unlocks as they approach and locks when they walk away.
Key recognition zones:
![Peugeot 2008. Proximity Keyless Entry and Start](images/proximity_keyless_entry_and_start-1995/1959/peugeot_2008__proximity_keyless_entry_and_start_211.jpg)
Zone A: welcome lighting on approaching the vehicle (between 3 and 5
metres from the vehicle).
Zone B: automatic locking on leaving the vehicle (about 2 metres from
the vehicle).
Zone C: automatic unlocking and welcome lighting on approaching the
vehicle (between 1 and 2 metres from the vehicle).
For more information on Welcome lighting, please refer to the
corresponding section.
The automatic functions are
configured via the Driving / Vehicle touch screen menu.
Selective unlocking (driver’s
door, boot) is configured in the Driving/Vehicle touch screen menu.
Complete unlocking
Press the unlocking button.
Selective unlocking
Driver’s door and fuel/charging flap
Press the unlocking button...
Selective unlocking (driver’s
door, boot) is configured in the Driving/Vehicle touch screen menu.
Selective unlocking is deactivated by default.
Complete unlocking
The vehicle (doors and boot) unlocks:
Either automatically as the driver approaches in zone C, if the
automatic functions are activated...
Other information:
The engine shown here is an example for illustrative purposes only.
The locations of the following elements may vary:
Air filter.
Engine oil dipstick.
Engine oil filler cap.
Petrol engine
Diesel engine
Screenwash fluid reservoir
Engine coolant reservoir
Brake fluid reservoir
Battery/Fuses
Remote earth point (-)
Fusebox
Air filter
Engine oil filler cap
Engine oil dipstick
The
Di..
The following information groups together the answers to the most frequently
asked questions concerning the system.
Navigation
I cannot enter the navigation address.
The address is not recognised.
Use the "intuitive method" by pressing the "Search…" button at the
bottom of the "Navigation” page.
The route calculation is not successful.
The route settings may conflict with the current loc..