Peugeot 2008: PEUGEOT Connect Nav / First steps
With the engine running, a
press mutes the sound.
With the ignition off, a press turns the system on.
Increase or decrease the volume using the wheel or the "plus" or "minus"
buttons (depending on the equipment).
Use the menu buttons on either side of or below the touch screen for access
to the menus, then press the virtual buttons in the touch screen.
Depending on the model, use the "Source" or "Menu" buttons to access the
rolling menus, then press the virtual buttons in the touch screen.
Display the rolling menus at any time by pressing the screen briefly with
three fingers.
All of the touch areas of the screen are white.
Press the back arrow to go back a level.
Press "OK" to confirm.
The touch screen is of
the "capacitive" type.
To clean the screen, use a soft, non-abrasive cloth (e.g. spectacles
cloth) with no additional product.
Do not use sharp objects on the screen.
Do not touch the screen with wet hands.
Certain information is displayed permanently in the side bars or in the upper
bar of the touch screen (depending on equipment):
- Air conditioning status information (depending on version), and direct
access to the corresponding menu.
- Go directly to the audio source selection option, to view the list of
radio stations (or list of titles depending on the source).
- Go to the "Notifications" of messages, emails, map updates and,
depending on the services, the navigation notifications.
- Go to the settings for the touch screen and the digital instrument
panel.
Audio source selection (depending on equipment):
- FM/DAB/AM radio stations (depending on equipment).
- Telephone connected via Bluetooth and Bluetooth multimedia broadcast (streaming).
- USB memory stick.
- Media player connected via the auxiliary socket (depending on
equipment).
- Video (depending on equipment).

In the "Settings" menu,
it is possible to create a profile for an individual or for a group of people
with shared interests, and configure a wide range of settings (radio presets,
audio settings, navigation history, favourite contacts, etc.). Settings are
applied automatically.
In very hot conditions,
the volume may be limited to protect the system. It may enter standby mode (with
the screen and sound off) for 5 minutes or more.
The system will resume normal operation when the temperature in the
passenger compartment has dropped.
GPS navigation - Applications - Multimedia audio system - Bluetooth®
telephone
The functions and
settings described vary according to the vehicle version and configuration, as
well as the country of sale...
Voice control:
This control is located on the steering wheel or at the end of the lighting
control stalk (depending on equipment).
Short press, system voice control...
Other information:
This head-up 3D digital instrument panel can be customised.
Depending on the display mode selected, certain information is hidden or
presented differently.
Example with the "DIALS" display mode:
Fuel gauge (Petrol or Diesel)Charge level indicator (Electric)
Remaining range (miles or km)
Cruise control/speed limiter settingsDisplay of speed limit signs
Digital speedometer (mph or km/h..
Selective unlocking (driver’s
door, boot) is configured in the Driving/Vehicle touch screen menu.
Complete unlocking
Press the unlocking button.
Selective unlocking
Driver’s door and fuel/charging flap
Press the unlocking button.
Press it again to unlock the other doors and the boot.
Complete or selective unlocking and alarm deactivation is confirmed by the
flashing of the sidelamps ..