DS 3 Manuals

Peugeot 2008: Practical information / Energy economy mode

This system manages the duration of use of certain functions, in order to conserve a sufficient level of charge in the battery with the ignition off.

After switching off the engine, you can still use functions such as the audio and telematic system, the wipers and the dipped beam headlamps or courtesy lamps, for a combined duration of approximately 40 minutes.

Selecting the mode

A confirmation message is displayed when energy economy mode is entered, and the active functions are placed on standby.

Peugeot 2008. Energy economy mode If a telephone call is in progress at the time, it will be maintained for around 10 minutes via the audio system’s hands-free system.

Exiting the mode

These functions are automatically reactivated the next time the vehicle is used.

To restore the use of these functions immediately, start the engine and let it run:

  • For less than 10 minutes, to use the equipment for approximately 5 minutes.
  • For more than 10 minutes, to use the equipment for approximately 30 minutes.

Let the engine run for the specified duration to ensure that the battery charge is sufficient.

To recharge the battery, avoid repeatedly or continuously restarting the engine.

Peugeot 2008. Energy economy mode A flat battery prevents the engine from starting.

For more information on the 12  V battery, refer to the corresponding section.

Load reduction mode

This system manages the use of certain functions according to the level of charge remaining in the battery.

When the vehicle is being driven, the load reduction function temporarily deactivates certain functions, such as the air conditioning and the heated rear screen.

The deactivated functions are reactivated automatically as soon as conditions permit.

    Very cold climate screen

    (Depending on country of sale.) This removable protective screen prevents the accumulation of snow at the radiator cooling fan. It consists of a first element for the upper part of the front grille and a second element for the lower part...

    Bonnet

    Stop & Start Before doing anything under the bonnet, you must switch off the ignition to avoid any risk of injury resulting from an automatic change to START mode...

    Other information:

    Peugeot 2008 2019-2022 Owner's Manual: Changing a fuse


    Accessing the tools The extraction tweezers are located behind the fusebox cover. Depending on version: Unclip the cover by pulling at the top left, then right. Remove the cover completely. Take the tweezers from their housing. Open the glove box...

    Peugeot 2008 2019-2022 Owner's Manual: Power indicator (Electric)


    CHARGE Traction battery charging during deceleration and braking. ECO Moderate energy consumption and optimised driving range. POWER Energy consumption by the drive train during acceleration. NEUTRAL On switching on the ignition, your vehicle’s electric drive train neither consumes nor generates energy: after sweeping over the indicator, the needle or the cursor returns to its "neutral" posit..

    Categories

    read more

    Copyright © 2022 www.pe2008.net