DS 3 Manuals

Peugeot 2008: Indicators / Thermal comfort consumption indicator (Electric)

Peugeot 2008 2019-2024 Owner's Manual / Instruments / Indicators / Thermal comfort consumption indicator (Electric)

Peugeot 2008. Thermal comfort consumption indicator (Electric)

The gauge shows the consumption of electric power for thermal comfort functions.

It concerns the following equipment and systems:

  • Heating.
  • Air conditioning.
  • Front demisting/defrosting.
  • Rear screen demisting/defrosting.
  • Heated seats.

The traction battery powers the heating and air conditioning systems.

This equipment and these functions can be used:

  • If the vehicle is not plugged in, when the READY lamp is lit.
  • If the vehicle is plugged in, when the ignition is switched on.

Selecting Eco mode limits the performance of some equipment. The needle or cursor on the moves into the "ECO" zone.

Peugeot 2008. Thermal comfort consumption indicator (Electric) To quickly heat or cool the passenger compartment, feel free to temporarily select the maximum heating or cooling setting.

Excessive use of thermal comfort equipment, particularly at low speed, can significantly decrease the vehicle's range.

Remember to optimise equipment settings upon achieving the desired level of comfort, and adjust them if necessary whenever you start the vehicle.

After an extended period without using the heating, you may notice a slight odour during the first few minutes of use.

    Charge level indicator (Electric)

    The traction battery charge status and remaining range are displayed continuously when the vehicle is started. With the ignition off, opening the driver's door activates the indicator...

    Manual test. Total distance recorder

    Manual test This function allows you to check certain indicators and display the alerts log. It can be accessed via the "Check" button in the Driving/Vehicle touch screen menu...

    Other information:

    Peugeot 2008 2019-2024 Owner's Manual: Navigation


    Choice of a destination To a new destination Intuitive method: Press Navigation to display the main page. Press "Search…". Enter an address or the key words for the destination. Press "OK" to select the "Guidance criteria". Or Guided method: In order to be able to use the navigation, you must enter the "City", the "Street" (suggestions are displayed automatically when you begin typing)..

    Peugeot 2008 2019-2024 Owner's Manual: Drive Assist Plus


    Only available on versions with the EAT8 automatic gearbox and gear selector. This system automatically adjusts the speed and corrects the trajectory, using the Adaptive Cruise Control with Stop  &   Go function in conjunction with the Lane Positioning Assist. These two functions must be activated and in operation. This system is especially suitable for driving on motorways and mai..

    Categories

    Energy economy mode

    This system manages the duration of use of certain functions, in order to conserve a sufficient level of charge in the battery with the ignition off.

    After switching off the engine, you can still use functions such as the audio and telematic system, the wipers and the dipped beam headlamps or courtesy lamps, for a combined duration of approximately 40 minutes.

    Selecting the mode

    A confirmation message is displayed when energy economy mode is entered, and the active functions are placed on standby.

    Peugeot 2008. Energy economy mode If a telephone call is in progress at the time, it will be maintained for around 10 minutes via the audio system’s hands-free system.

    read more

    Copyright © 2024 www.pe2008.net