Peugeot 2008: In the event of a breakdown / Warning triangle
As a safety precaution, before leaving your vehicle to set up and install the
triangle, switch on the hazard warning lamps and put on your high visibility
vest.
Storage compartment

There is a compartment in the interior trim of the tailgate to store a
warning triangle.
- After opening the tailgate, release the cover by turning the screw a
quarter turn to the left.
Assembling and placing the triangle

For versions supplied with a triangle as original equipment, refer to the
illustration above.
For other versions, refer to the assembly instructions provided with the
triangle.
- Put the triangle in place behind the vehicle, as required by local
legislation.
With Diesel engines, the fuel system must be primed if you run out of fuel.
Before starting to prime the system, it is essential to put at least 5
litres of Diesel into the fuel tank...
Other information:
To recharge, connect the vehicle to a domestic electrical system (for
domestic or accelerated charging) or a fast public charging station (for fast
charging).
For a full charge, follow the desired charging procedure without pausing it,
until it ends automatically...
Release
Pull the parking brake lever up slightly, press the release button, then
lower the lever fully.
When driving the vehicle, if
this warning lamp and the STOP warning lamp come on, accompanied by an
audible signal and the display of a message, this means that the parking brake
is still applied or has not been fully released...