Peugeot 2008: Ease of use and comfort / Front seats

Front head restraints

Height adjustment

• Upwards: pull the head restraint up to the desired position; the head restraint can be felt to click into position.
• Downwards: press lug  A to lower the head restraint.

The adjustment is correct when the upper edge of the head restraint is level with the top of the head.

Removing a head restraint

• Pull the head restraint fully up.
• Press the lug A to release the head restraint and remove it completely.
• Stow the head restraint securely.

Refitting a head restraint

• Insert the head restraint rods into the guides in the corresponding seat backrest.
• Push the head restraint down as far as it will go.
• Press the lug A to release the head restraint and push it down.
• Adjust the height of the head restraint.

Never drive with the head restraints removed; they should be in place and adjusted for the occupant of the seat.

Manually-adjustable seats

Longitudinal

• Raise the control bar and slide the seat forwards or backwards.

Backrest angle

• Turn the knob to adjust the backrest.

Height

• Pull the control upwards to raise the seat or push it downwards to lower it until the desired position is obtained.

Electrically-adjustable seats

Longitudinal

• Push the control forwards or rearwards to slide the seat.

Backrest angle

• Tilt the control forwards or rearwards.

Cushion height and angle

• Tilt the rear of the control upwards or downwards to obtain the required height and angle.

Electric lumbar adjustment

• Press the + or - control to obtain the desired lumbar support.

Massage function

(Driver’s seat only)

This function provides lumbar massage; it only operates when the engine is running as well as in STOP mode of the Stop & Start system.

Activation/Deactivation

• Press this button to activate/deactivate the function.

Upon activation, the indicator lamp comes on.

The massage function is activated for a period of one hour.

During this time, massage is performed in 6  cycles of 10  minutes (6  minutes of massage followed by a 4-minute break).

After one hour, the function is deactivated; the indicator lamp goes off.

Heated seats

The function is active only with the engine running.

On/Off

• Press the button corresponding to the seat.
• Each press changes the heating level; the corresponding number of indicator lamps come on.
• To switch off the heating, press the button until all of the indicator lamps are off.

The system status is memorised when the ignition is switched off.

Do not use the function when the seat is not occupied.

Reduce the heating intensity as soon as possible.

When the seat and passenger compartment have reached a satisfactory temperature, switch the function off; reducing electrical consumption in turn decreases energy consumption.

Prolonged use of the heated seats is not recommended for those with sensitive skin.

There is a risk of burns for people whose perception of heat is impaired (illness, taking medication, etc.).

To keep the heated pad intact and to prevent a short circuit:

• do not place sharp or heavy objects on the seat,
• do not kneel or stand on the seat,
• do not spill liquids onto the seat,
• never use the heating function if the seat is wet.