Peugeot 2008: Unlocking the vehicle / Doors
Opening
From outside
- After unlocking the vehicle or with the Keyless Entry and Starting
electronic key in the recognition zone, pull the door handle.
From inside
- Pull the interior opening control of a door; this unlocks the vehicle
completely.
With
selective unlocking activated:
- Opening the driver's door unlocks the driver's door only (if the
vehicle has not already been completely unlocked).
- Opening one of the passenger doors unlocks the rest of the
vehicle.
Closing
If a door is not properly
closed, this warning lamp comes on accompanied by a message if the engine is
running, and an audible signal when the vehicle is travelling at more than 6
mph (10 km/h).
Lost keys, remote control, electronic key
Visit a PEUGEOT dealer with the vehicle's registration certificate, a
personal identification document and, if possible, the label bearing the key
code...
Opening
After unlocking the vehicle or just the boot, press the opening control
and then raise the tailgate.
Closing
Lower the tailgate using one of the interior grab handles...
Other information:
CHARGE
Traction battery charging during deceleration and braking.
ECO
Moderate energy consumption and optimised driving range.
POWER
Energy consumption by the drive train during acceleration.
NEUTRAL
On switching on the ignition, your vehicle’s electric drive train neither
consumes nor generates energy: after sweeping over the indicator, the needle or
the cursor returns to its "neutral" posit..
With Diesel engines, the fuel system must be primed if you run out of fuel.
Before starting to prime the system, it is essential to put at least 5
litres of Diesel into the fuel tank.
For
more information on Refuelling and on Misfuel prevention (Diesel),
refer to the corresponding section.
1.5 BlueHDi engines
Switch on the ignition (without starting the engine).
Wait around 1 minute a..